BARONESS Triple Hybrid Green mower LM315GC cutting width 152 cm  

The Baroness LM315GC is the green mower that provides unique distributors with its mechanical hybrid drive - the first of its kind. The green mower uses wire cable to drive its cutting cylinders, the method has been proven for over 20 years, a method you will not stop using because it more or less eliminates the risk of hydraulic leakage on the greens.

Also available as a Tee variant and is then called LM315TC. It is then always equipped with both 2WD/3WD and a 7-blade cutting cylinder with the same fine type of steel and lower knife

Thanks to the cable drive which is connected on top of the cutting unit, not on the side like an electric motor or a hydraulic motor, an optimal balance is achieved, the cutting unit does not weigh down on any side as other manufacturers' units do.

With the green mower LM315GC, the cutting quality on the greens is increased and with an adjustable groomer that can be optimally adjusted for both counter-clockwise and clockwise rotation, a smoother ball roll is achieved. The machine is equipped with easy-to-use electronics that make it one of the safest machines on the market.

Thanks to the deliberate lack of electronic data control but instead an analogue relay control which is significantly simpler and more reliable and also less expensive, Baroness can in return put the money where it really benefits and it is on the MARKET'S BEST CUTTING CYLINDERS AND BASE STEEL as well as the entire suspension around around, what is it about on a golf course? Is it fiddling with buttons OR CUTTING A PERFECT CUT day after day, year after year.

With a Baroness, it is the Greenkeeper who has the power, not the other way around

Since the aggregates are not dependent on the engine, you will have the same cylinder speed regardless of how the green looks or how long you use the machine. Choose between high and low speed on the cylinder speed depending on the job you are doing with the green mower.

The LM315GC is equipped with B-ACT (Baroness Aggression Cutting Technology), which means that Baroness equipped with this can optimize each cutting cylinder for all different types of surface easily, which is unique in the industry, because Baroness is all about cutting quality, simplicity, flexibility, long-term .

The cutting units are gear-driven, a precision work, resulting in a long service life of the machine

You can choose how aggressively you want to go about the blades of grass with the help of the adjustable under-steels, all to get a superb final result. With the adjustable groomers, you can easily choose which way the groomers should rotate without any complicated tools.

When the grass is damp and the machine would start to spin on a tire, the 3-wheel drive is easily engaged to minimize damage to the grass. Of course, you also have the added benefit of a reliable Kubota 21 hp environmental diesel engine.

When it is time for backlapping, each unit is backlapped separately, thanks to this no unit is left running dry and the safety of personnel is significantly increased.

With the cable-driven cylinders, the risk of hydraulic hose breakage is reduced.
The groomer is adjustable for both forward and reverse rotation.
Supplied with hydraulic power steering.
Supplied with Grammer driver's seat, which gives all users a comfortable and comfortable working position.
An LED light turns on for visibility when the lawnmower is placed in its mowing position.
Uses cable wires that reduce the risk of oil leakage.
Use of tilt wheel and seat adjustment allows for a driving position that suits the driver's body type.

Optional
Options, rear brush, 3WD, Groomer, Lighting, Vertical cutter, Nail unit, dethatching unit, rotating brush, vibrating roller, flat brush unit, Tee optimized, protective net, smooth front roller.

Length: 215cm
Width: 203cm
Height: 141cm
Cutting width: 152cm
Cutting height: 2-20 mm
Drive: 2WD / 3WD
Speed: 0-15 km/h (forward)/ 0-6 km/h (reverse)
Body weight: 597kg
Lawnmower weight: 621kg
Engine: Kubota D722-E4B, 15.9 kW (21 hp) at 3000 rpm
Fuel capacity: Diesel 20 liters
Cutting width: 152cm
Height of cut range: 2 mm - 29 mm
Steering: Hydraulically supported
Maximum speed: Transport 15km/h, Cutting 6km/h